
EPS/Epoxy Construction
Taking Epoxy Technology to the Next Level
At BCSC we take pride in integrating cutting-edge construction materials using the best techniques in the industry. Take our Carbon Roots technology: instead of glassing carbon tape onto the blank, we carefully place carbon roving strips into pre-shaped channels, eliminating surface bumps and maximising the board’s structural integrity.

CARBON ROOTS
For boards until 7ft

CARBON RAILS
For static wave boards & SUP

CARBON RAILS/STRINGER
For boards over 7ft
EPS made in Spain
Developed by Basque Country Surf Company
Density 32 kg/m3 for blanks until 7’8
Density 25 kg/m3 for blanks over 8’0
Glassing
Resoltech eco* resin / Hexcel or Aerolite fiberglass
Pro Light | 4 + 4 oz deck | 4 oz bottom
Light | 4 + 4 oz deck | 6 oz bottom
Standard | 4 + 6 oz deck | 6 oz bottom
Strong | 6 + 6 oz deck | 6 oz bottom
PU/Polyester
Polyurethan Blanks
Only from Arctic Foam

Glassing
Silmar resin / Hexcel or Aerolite fiberglass
Pro Light | 4 + TP oz deck | 4 oz bottom
Light | 4 + 3/4 oz deck | 4 oz bottom
Standard | 4 + 4 oz deck | 4 oz bottom
Standard plus on top | 4 + 6 oz deck | 4 oz bottom
Standard plus on bottom | 4 + 4 oz deck | 6 oz bottom
Strong | 6 + 6 oz deck | 6 oz bottom
Super strong | 6 + 6 oz deck | 6 + 6 oz bottom
Strong rails (static waves) | 6 + 3/4 oz deck | 6 oz bottom
Carbon Options
REINFORCEMENT TAPES
The flattest and lightest reinforcement available

9 STRIPES
Deck and/or bottom

3 STRIPES
Deck and/or bottom

2cm STRIPE
Deck and/or bottom
TAIL PATCHES

Deck
(fin plug reinforcement)

Bottom
Leave a Reply